Brief introduction
NCT6KT temperature transducer is composed of NT
and relative leading wire, the value of NTC the
nential relation as per the temperature change, get cur
, then referring to temperature/resistance meter. It is
le structure, small volume, can test "point" temperatu
al resistance, high sensitivity; (3) high resistivity, s
urement; (4) small power consumption, fit for remote
edium's temperature such as air, liquid (oil).  

Main Technical Data
Ambient conditions
Operating temperature: -10℃~125℃
Relative Humidity: 0~95%
Vibration and shock: comply with Sort 1 Grade B in ite
Mechanical structure
Shell: reinforcement PPO, high-temperature plastic cop
Encapsulated material: heat silicon gel ZR341, epoxy
605
Electrical performance and interface
Tested media: gas (air), liquid (water), oil, etc.
Measurement range: -40℃~150℃
Measurement accuracy: -10℃~30℃,±0.3℃;30℃
Output signal: 169.8?~49510?(RT characteristic ta
Electric interface: GDM(GSP) aviation plug(Pin
Installation interface: M20×1.5 screws
Insulation performance
Insulation resistance: greater than  between Pin 1,2 and copper shell
Voltage withstand: 500Vac/50Hz/ 1min, no breakdown or flashover phenomena

Output function definition (See below table)

Installation, operation and malfunction disposal
1.1 Connect any one of two output lines of the sensor as positive electrode, form a circuit is
ok..
1.2 Before installation, check transducer, test DC resistance of the transducer with
multimeter; at ambient 25℃, the value of resistance within 4934?~5066? between two lines
means the temperature work normally.    
1.3 When installation, suggest to make sure the copper probe totally immersed to the tested
media.                                    

Outline and dimensions

Installation Drawing

Thermo-resistive characteristic table of thermal resistance