Summary
ZDS2 slot-type ammeter is a measuring gauge indicated by magnetoelectric pointe
can measure two kinds of electrical signals simultaneously. Presently, this gauge is widely
in multifunctional module of standardized locomotive cab. Based on the designed techn
application of gauge can be extended for various railroad locomotive, mine locomotive,
and light rail.
It is endowed with following advantages: small volume, convenient installation, a
reading, with night lighting, stable reading, and high reliability etc..

Technique Parameter
1\Accuracy:Grade 1.5,Secondary gauge with sensor: Grade 2.5
2\Applicable environment:-25℃~+50℃,Relative humidity ≤ 95%
3\Lighting voltage:DC24V±20%;DC110V±20%
4\Tested signal type:Direct voltage, Alternating voltage,
Direct current, Alternating current,
Rotation speed, Pressure, Temperature
5\Isolation Strength: 1000V/50Hz/1min sine wave     Without damage and flas
6\Insulation resistance:≥5MΩ
7\Measuring range:
0~ 40KV(full-scale value >600V   Multiplicator is needed by main engine plant)
0~ 8000A(full-scale value >30A   Shunt is needed by main engine plant)
0~1500r/min(with sensor)
0~1000Kpa(with sensor)
0~150℃(with sensor)
And other measuring range of direct voltage and direct current in locomotive
8\Weight:650g
9\Max. outline dimension:146×155×65
Installation:    Install with clamping plate, please see diag

Connection: Please see diagram 2

Malfunction & Maintenance
1\Malfunction & simple maintenance

Please contact supplier, if the above malfunctions could not be settled. Don't open the gauge
yourself.
2\The gauge has to be readjusted after every three months, in order to ensure the accuracy.
3\Without the allowance of supplier, please don't open the gauge for adjusting, otherwise it
will cause error. Please do not repair the inner pointer, pin tube, and movement yourself.

Diagram1